Learn About Projectors

The Active Maintenance Filter (AMF) sensor detects the intake air volume. If thevolume is less than the prescribed level, the filter is automatically wound anda clean filter surface is set in position. The filter can also be replaced withouthaving to use any tools.

It's all about projected image, and DLP® projectors provide reliability through extended use, eliminating color decay and producing incredibly high contrast levels using a four-segment color wheel for easy-to-read text and graphics. An optional six-segment color wheel is alsoavailable for enhanced brilliant color.

Industry's First¹ Lamp Selection System: No Lamp Maintenance Necessary for Approximately 6,000 Hours²
The foundation of 2-lamp model projector has developed with the "highprecision optical axis adjustment technology" the technology was further evolved to enable the mirror to automatically select the lamp using a control motor. Lamp selection system makes approximately 6,000 hours² of projection possible, or twice as long as conventional one-lamp models. When the first lamp is worn-out before the expected time, the lamp selection mirror automatically rotates and the second lamp starts the projection. This will avoid the interruption of the presentation due to the unexpected lamp worn-out.³

1. Alternating Mode
   If the lamp is used for more than 10 hours at one time, then the lamp is automatically switched upon powering up the next time.
2. Relay Mode
   "Relay Mode" uses one lamp to recommended lamp replacement time, then switches lamps.

¹ For projectors as of December 6, 2008
² When in ECO1 mode
³ When changing other lamp, the image is interrupted several tens of seconds.

Similar to the idea of "stand by" mode in computers, the Mechanical Shutter system allows users to completely block the projection temporarily and reactivate the projector later during projector transitions. This convenient feature eliminates time wasted in shutting down and starting up projectors, enabling seamless transition between operation of multiple units.

At SANYO, we understand that if we make our projectors talk among themselves within the PJ-Net network, the outsider, i.e. the user, can then easily retrieve information from connected projectors, enable sharing images, and solve technical problems through the use of the PJ Master Software. We have expanded our current PJ-Net network system solutions (PJ-Net Organizer, PJ-Net Organizer Plus / Plus II, and Advanced PJ-Net Organizer) with the addition of the PJ-NET ORGANIZER CAMERA and the PJ MASTER SOFTWARE. These new products will make central projector monitoring, administration, troubleshooting, and transferring images easier than ever for selected Large Fixed, Fixed, Portable and Ultra Portable projectors.

The world's first¹ QuaDrive optical engine in the XP200L is a newly developed and highly advanced version of the conventional 3LCD system and features an additional Color Control Device. By controlling the amount of yellow light, the Color Control Device increases the level of color purity by approximately 20% compared with our previous model.² This gives images remarkable levels of both brightness and color.

PLC-XP200 (White Paper) (2008) (1MB)

¹ For projectors as of June 18, 2008
² The PLC-XP100L

At last a projector that goes where no projector has gone before. SANYO introduces an innovative ultra short focus projector with the world's shortest* projection distance. The SANYO PLC-XL51 / XL50 not only looks like a work of modern art it is also able to throw an 80" diagonal image with the projector approximately three inches away from the screen. This means that extremely large images can work well in almost any available room or space, without hot spots, keystone distortion or focus issues. The PLC-XL51 has wired/wireless network capability, an SD card slot and alarm. Great unit, great features.