SATELLITE RECEIVER TO DTV HOOKUPS
Choose the best connection available. The RF output (75 ohm) from a Satellite receiver is an analog signal.
Therefore, the RF terminal is best reserved for an antenna connection to receive local digital channels.
COMPOSITE AV CONNECTIONS (VIDEO2)
S-VIDEO AV CONNECTIONS (VIDEO2)
1 Connect your Satellite receiver to the VIDEO2 jacks, as shown here, matching connector colors to jack colors.
2 Press the INPUT key on the DTV remote to select Video 2.
3 Use the Satellite receiver’s remote to change channels.
NOTE: Refer to the user’s guide that came with your Satellite receiver or contact your provider for operating instructions
1 Connect a 4-pin round S-Video cable from your Satellite receiver to the S-Video jack on the DTV.
2 Connect an Audio cable to White and Red audio jacks.
3 Press the INPUT key on the DTV remote to select Video 2.
4 Use the Satellite receiver’s remote to change channels.
NOTE: Refer to the user’s guide that came with your Satellite receiver or contact your provider for operating instructions.