SANYO LCD Hookup Diagrams

1 Connect a cable from the Cable Service wall plate to the Input terminal on a signal splitter.

2 Connect one splitter output to the DTV ANT terminal and the other splitter output to the Cable Box In terminal using two 75 ohm coaxial cables.

3 Connect the Cable box “Out to TV” terminal to the VCR “In from Ant” terminal using another 75 ohm coaxial cable.

4 Connect your Cable box Video Out jacks to the VCR Video In jacks, matching connector colors to jack colors (optional for better recording quality).

5 Connect your VCR Video Out jacks to the DTV VIDEO1 jacks, matching connector colors to jack colors.

6 Press the MENU key and select All Channel Search to program in your Cable channels. (Refer to the owner’s manual for specific instructions.)

7 Use the INPUT key on the DTV remote to select Video 1 to watch premium channels and VCR playback.

NOTES: This hookup does not provide for off-air digital channels to be received. Only non-premium Cable channels are received by the DTV tuner.

You can record a premium cable channel and watch a non-premium cable channel.

The VCR must be powered ON to watch premium channels.

Select premium channels and channels to be recorded with the Cable box tuner.

Set VCR channel to match RF output from Cable box (usually channel 2, 3, or 4). Check with your provider for details.

CLICK HERE FOR SUPER VHS VCR PLAYBACK HOOKUP OPTION