SANYO LCD Hookup Diagrams

1 Connect a 75 ohm coaxial cable from the Cable Service wall plate to the ANT terminal on the DTV.

2 Perform an “All Channel Search.” The All Channel Search will search for off-air channels and cable channels. The DTV can receive cable or off-air channels, but not at the same time. If after two searches the DTV still fails to detect any channels, the DTV will tune to Video1.

NOTES: If EXIT is pressed, the DTV will skip Channel Search and tune to Video1 without storing any channels in the Channel Map database.

The illustrations depict a first time operation. Refer to the Owner’s Manual for instructions on how to use the Menu system to perform an All Channel Search for all other situations.

Connecting your analog Cable service in this manner will NOT allow you to receive any local off-air digital channels that may be available.

To connect an antenna to receive available local off-air digital channels and analog Cable channels, you must also connect a VCR or DVD Recorder. Click on Analog Cable/VCR or Analog Cable/DVD Recorder for those hookup options.

ANALOG CABLE HOOKUP (RF)		VCR TO DTV AV HOOKUP OPTIONS
Contact your Cable provider for information about your service.		Choose the best connection available on your VCR. Refer to the owner’s manual that came with your VCR for available hookup options and operating instructions.
ANALOG CABLE CONNECTION (RF) 1 Connect a 75 ohm coaxial cable from the Cable Service wall plate to the ANT terminal on the DTV. 2 Perform an “All Channel Search.” The All Channel Search will search for off-air channels and cable channels. The DTV can receive cable or off-air channels, but not at the same time. If after two searches the DTV still fails to detect any channels, the DTV will tune to Video1. NOTES: If EXIT is pressed, the DTV will skip Channel Search and tune to Video1 without storing any channels in the Channel Map database. The illustrations depict a first time operation. Refer to the Owner’s Manual for instructions on how to use the Menu system to perform an All Channel Search for all other situations. Connecting your analog Cable service in this manner will NOT allow you to receive any local off-air digital channels that may be available. To connect an antenna to receive available local off-air digital channels and analog Cable channels, you must also connect a VCR or DVD Recorder. Click on Analog Cable/VCR or Analog Cable/DVD Recorder for those hookup options.		COMPOSITE & S-VIDEO AV CONNECTIONS (VIDEO1) 1 Connect your device to the VIDEO1 jacks, as shown here, matching connector colors to jack colors. 1 If you have a Super VHS VCR, connect a 4-pin round S-Video cable from the Super VHS VCR to the S-Video jack on the DTV, instead of the yellow connector. 2 Use the INPUT key on the DTV's remote to select Video 1 for VCR playback. NOTE: For input connections to the VCR, click on Antenna/VCR, Analog Cable/VCR, or Analog Cable Box/VCR.