CABLE / VCR / AV CONNECTIONS (VIDEO1)
|
1 Connect a cable from the Cable Service wall plate to the “IN” terminal on the VCR. 2 Connect the “OUT” terminal on the VCR to the ANT terminal on the DTV using a 75 ohm coaxial cable. 3 Connect your VCR to the VIDEO1 jacks on the DTV, as shown here, matching connector colors to jack colors (optional for better playback quality). 4 With the VCR powered OFF, press the MENU key on the DTV’s remote and select All Channel Search to program in your analog Cable channels. (Refer to the owner’s manual for specific instructions.) 5 Use the INPUT key on the DTV’s remote to select Video 1 for VCR playback. |
NOTES: This hookup does not provide for off-air digital channels to be received. Only analog Cable channels are “passed through” to the DTV tuner. When the VCR is powered ON, the VCR’s TV/VCR switch must be in the TV position for Cable channels to “pass through” to the DTV tuner. You can record and watch different analog channels . The Digital Cable Search Menu option can locate ClearQAM Cable channels, when available. Refer to the owner’s manual for specific instructions. A Digital Cable Search will remove regular analog Cable channels from memory.
CLICK HERE FOR SUPER VHS VCR PLAYBACK HOOKUP OPTION
|